Updated November 2026
Water trapped inside a Christmas inflatable can make it sag, grow mildew and eventually damage the seams. To get water out of Christmas inflatables, you need to drain the water through the blower opening or a low point, dry the interior fully, and then store the unit properly. The steps below cover the process from start to finish.
Why Water Gets Inside Inflatables
Most water enters through the blower opening during rain, or it condenses inside the fabric when the unit cools overnight. Water can also pool at the base if the inflatable sits in a low spot in the yard. Standing water weighs down the fabric and can wear through the stitching over time.
Shopping for one? See our guide: 7 Best Christmas Blow Up Inflatables for Yard Displays (2026).
Step-by-Step: Draining the Water
- Unplug the blower and turn off the power at the outlet before you touch the unit.
- Remove the anchor stakes or weights so the inflatable can move freely.
- Lay the inflatable on a clean, sloped surface, such as a driveway, with the blower end slightly higher than the rest.
- Open the blower port or any drain point the manufacturer provides, and let gravity pull the water out.
- Gently roll or fold the inflatable from the high end toward the low end to push remaining water toward the opening.
- Repeat until no more water comes out.
Drying the Inside Completely
Drying matters as much as draining. Water left inside can cause mildew, sour smells and weak spots that fail the next time you inflate the unit.
- Air dry in shade or indirect sun. Direct sun can weaken some fabrics over time, and a damp interior will stay wet longer in a closed garage.
- Run the blower without the heater. If your model has a fan-only setting, running it for a short period can move air through the interior and speed up drying.
- Check the seams and folds. Water often hides in creases, so press along the seams and reposition the fabric until you feel no damp spots.
Storing the Inflatable Once It Is Dry
Store the inflatable only after it is completely dry to the touch inside and out. Fold it loosely rather than tightly crushing it, and keep it in a clean, dry bin away from concrete floors and rodents. If you are unsure how to store your specific model, check the manufacturer’s care instructions. For general cleaning guidance, see How to Clean Christmas Inflatables: A Step-by-Step Guide for Beginners.
Preventing Water Problems Next Season
Good placement and anchoring reduce the chance of water getting in. Wind and rain often work together, so How to Secure Christmas Inflatables in Wind and Bad Weather explains how to keep the unit stable. Heavy anchoring also helps the inflatable stay upright instead of pooling water, and Weights for Christmas Inflatables: How to Anchor Yard Displays Safely covers the options. For a deeper look, How to Thaw a Turkey Safely: Refrigerator, Cold Water and Microwave covers this in detail.
Common Mistakes
- Running the blower while the inflatable is still wet, which can trap moisture inside.
- Storing the unit in a damp garage or basement.
- Folding it tightly while damp, which encourages mildew along the folds.
- Ignoring small leaks, since trapped water can make them worse.
- Draining while the unit is still plugged in. Always disconnect power first.
Recommended Gear
A wet/dry shop vacuum with a hose attachment can help pull moisture out of the blower opening when draining by gravity is not enough. View on Amazon
A microfiber towel helps you wipe down the interior and seams quickly, which shortens drying time. View on Amazon
FAQ
Can I use a hair dryer to dry the inside of an inflatable?
It is not recommended. Concentrated heat can damage the fabric and seams. Air drying or running the blower on a fan-only setting is a safer approach.
How long does an inflatable take to dry?
Drying time depends on humidity, temperature and how much water got inside. Allow enough time for the interior to feel completely dry before you store or reinflate the unit.
Is it safe to reinflate a unit that was left wet?
Only after it has dried fully and you have checked for damage. If you find persistent mildew, tears or weak seams, consult the manufacturer or a qualified repair service before using it again.
Conclusion
To get water out of Christmas inflatables, drain through the blower opening with the unit tilted, dry the interior completely and store it only when it is fully dry. Taking these steps after every wet spell protects your display and makes it easier to set up next season. Check the manufacturer’s guidance for your specific model, and consult a professional for any repair concerns.


Write Your Review
No reviews yet. Be the first to share your experience!